Electric diaphragm pumps

Technical Specifications

Flow rate ≤ 15 m³/h

Pressure ≤ 8 bar

Liquid temperature ≤ +110 °C

Particle size ≤ 10 mm

Drive type electric

Materials (wetted) PE, PTFE, aluminum, AISI 316L

Seal type Diaphragm (hermetic, electrically operated)

Price

On request

Tapflo electrically operated diaphragm pumps: lower energy consumption than an air-operated pump, long diaphragm life and the ability to run dry without damage, with no seals and a simple design for easy maintenance. Capacity up to 15 m³/h (250 l/min), discharge pressure up to 8 bar (the technical data table states 4 bar), 110 °C, solids 4 to 10 mm (4 to 15 mm hygienic, up to 51 mm with large-solids check valves); ATEX version available.

Key technical parameters

Flow rate: up to 15 m³/h (250 l/min)
Pressure: up to 8 bar
Fluid temperature: up to 110 °C
Solids passage: 4 to 10 mm (hygienic 4 to 15 mm)
Drive: Electric motor
Materials: PE, PTFE, aluminum, AISI 316L

Media handled

Liquids: Chemicals, Acid, Alkali, Solvent, Slurry, Paint/lacquer, Glue
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Chemical and general industry
Hygienic applications (hygienic version)

Chemical

Petrochemical

Industrial processes

Water treatment

Pulp & paper

No reviews yet for this pump series.