NEMO SY (bearing housing design)

Technical Specifications

Flow rate ≤ 500 m³/h

Pressure ≤ 48 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Particle size ≤ 150 mm

Suction lift ≤ 9 m

Drive type electric,bareshaft

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO SY progressing cavity pump with a bearing housing and two-part shaft that allows all types of drive and mechanical seal and makes servicing of the rotating parts simple and fast; optional auger on the coupling rod for high-consistency fluids. Flow rates up to 500 m³/h (2,200 gpm) at pressures up to 48 bar (standard) or up to 240 bar (special applications); multistage designs up to 300 bar.

Key technical parameters

Flow rate: up to 500 m³/h
Pressure: up to 48 bar (240 bar special)
Design: bearing housing, any drive
Rotor / stator geometries: S, L, D, P
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Waste water, chemical and petrochemical industry
Mining and oil and gas, including multiphase applications
Pulp and paper, biomass and food industries

Wastewater treatment

Municipal wastewater

Chemical

Petrochemical

Pulp & paper

Biogas

Food & beverage

Industrial processes

No reviews yet for this pump series.