NEMO BY Mini

Technical Specifications

Flow rate ≤ 0.567 m³/h

Pressure ≤ 12 bar

Viscosity ≤ 10 000 000 cSt

Suction lift ≤ 9 m

Drive type electric,close-coupling

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO BY Mini block-design metering pump with directly flanged drive and stainless steel 316 as standard: almost pulsation-free dispensing with high repeatability and a dosing accuracy of ±1%. Flow rates from 0.3 to 150 gph (1.1 to 567 l/h) at pressures up to 12 bar (36 bar special); four dimensionally identical rotor / stator sizes.

Key technical parameters

Flow rate: 1.1 to 567 l/h
Pressure: up to 12 bar (36 bar special)
Dosing accuracy: ±1%
Material: stainless steel 316
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Corrosive

Applications and industries

Chemical metering in general industry
Pharmaceutical and food industry, laboratories
Waste water plants and pulp and paper industry

Wastewater treatment

Municipal wastewater

Chemical

Petrochemical

Pulp & paper

Biogas

Food & beverage

Industrial processes

No reviews yet for this pump series.