NEMO BP / SP (bridge breaker)

Technical Specifications

Flow rate ≤ 200 m³/h

Pressure ≤ 48 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Particle size ≤ 150 mm

Suction lift ≤ 9 m

Drive type electric,close-coupling

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO BP with an integrated bridge breaker (SP with bearing housing) for compacted, lumpy and crumbly product that tends to bridge: the housing has a bridge breaker that also mixes in additives, an enlarged rectangular hopper, a removable cone-shaped compression chamber and a patented horizontal conveying screw. Flow rates up to 200 m³/h (880 gpm) at pressures up to 48 bar.

Key technical parameters

Flow rate: up to 200 m³/h
Pressure: up to 48 bar
Design: integrated bridge breaker, compression chamber, conveying screw
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Waste water plants
Food, mining, paper and chemical industry

Wastewater treatment

Municipal wastewater

Food & beverage

Chemical

Mining and mineral processing

Pulp & paper

Biogas

No reviews yet for this pump series.