NEMO B.Max BM / SM (biogas)

Technical Specifications

Flow rate ≤ 70 m³/h

Pressure ≤ 48 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Suction lift ≤ 9 m

Drive type electric,close-coupling

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO B.Max for the biogas industry: a hopper pump (BM block design, SM with bearing housing) with a large rectangular feed hopper, a coupling rod with a patented horizontal conveying screw and a hydrodynamic flushing stud on the hopper that feeds and mixes substrates such as liquid manure with organic biomass. Flow rates up to 70 m³/h (308 gpm) at pressures up to 48 bar; a NEMO BY can boost the substrate into the B.Max.

Key technical parameters

Flow rate: up to 70 m³/h
Pressure: up to 48 bar
Design: large hopper, conveying screw and flushing stud
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Liquid manure, Sludge, Slurry
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Biogas plants and farms
Pumping and mixing of substrate with biomass

Biogas

Agriculture

Wastewater treatment

No reviews yet for this pump series.