NEMO SF Silo pump

Technical Specifications

Flow rate ≤ 200 m³/h

Pressure ≤ 48 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Particle size ≤ 150 mm

Suction lift ≤ 9 m

Drive type electric,bareshaft

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO SF silo pump with bearing housing, installed below a storage silo: its enlarged open hopper receives dewatered sludge and conveys it to incinerators, trucks or trains. Includes a barrier device that isolates the rotor / stator system so that parts can be replaced even with solids in the silo. Flow rates up to 200 m³/h (880 gpm) at pressures up to 48 bar.

Key technical parameters

Flow rate: up to 200 m³/h
Pressure: up to 48 bar
Design: bearing housing, enlarged hopper, barrier device
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Waste water treatment plants
Sludge storage silos

Wastewater treatment

Municipal wastewater

Food & beverage

Chemical

Mining and mineral processing

Pulp & paper

Biogas

No reviews yet for this pump series.