NEMO BY / SY FSIP (Full Service-in-Place)

Technical Specifications

Flow rate ≤ 200 m³/h

Pressure ≤ 24 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Particle size ≤ 150 mm

Suction lift ≤ 9 m

Drive type electric,close-coupling,bareshaft

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO BY / SY in FSIP (Full Service-in-Place) design: the revised housing has a large inspection cover (five screws) so rotor, stator and joints can be serviced without removing the pump from the pipework, and all wear parts can be replaced in less than half the time. Sizes NM045 to NM105, 2 to 200 m³/h at up to 24 bar, in steel or stainless steel, with standard stator or iFD stator technology (NM021 to NM063); levels FSIP.ready, FSIP.advanced and FSIP.pro.

Key technical parameters

Flow rate: 2 to 200 m³/h (NM045 to NM105)
Pressure: up to 24 bar
Design: large inspection cover, split coupling rod, optional iFD stator
Levels: FSIP.ready, FSIP.advanced, FSIP.pro
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Environmental technology
Food, oil and chemical industry

Wastewater treatment

Municipal wastewater

Chemical

Petrochemical

Pulp & paper

Biogas

Food & beverage

Industrial processes

No reviews yet for this pump series.