NEMO BO / BF FSIP (hopper pumps)

Technical Specifications

Flow rate ≤ 200 m³/h

Pressure ≤ 48 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Particle size ≤ 150 mm

Suction lift ≤ 9 m

Drive type electric,close-coupling

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO BO and BF hopper pumps in FSIP design with direct flange drive, a housing with a rectangular feed hopper and large inspection cover, a coupling rod with conveying screw and a compression chamber. BO FSIP: up to 200 m³/h at 24 bar; BF FSIP: up to 200 m³/h at up to 48 bar, with a maintenance-friendly discharge flange extension that allows stator and rotating parts to be changed without removing the discharge pipeline.

Key technical parameters

Flow rate: up to 200 m³/h
Pressure: up to 24 bar (BO) / 48 bar (BF)
Design: hopper pump with inspection cover (FSIP)
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Environmental technology
Food and chemical industry

Wastewater treatment

Municipal wastewater

Food & beverage

Chemical

Mining and mineral processing

Pulp & paper

Biogas

No reviews yet for this pump series.