NEMO BO Cutter pump

Technical Specifications

Flow rate ≤ 200 m³/h

Pressure ≤ 24 bar

Liquid temperature -20 … +300 °C

Viscosity ≤ 10 000 000 cSt

Suction lift ≤ 9 m

Drive type electric,close-coupling

Installation horizontal

Materials (wetted) Grey cast iron, stainless steel 316, Duplex, Hastelloy, titanium; rotor with wear-resistant coatings or ceramic (CERATEC)

Seal type Mechanical seal (single / double-acting, cartridge), stuffing-box packing, lip seal or magnetic coupling

Price

On request

NETZSCH NEMO BO Cutter pump developed to convey and cut in one process step: rectangular feed hopper, coupling rod with conveying screw and compression chamber, with a cutting system in the compression chamber and at the pump discharge that chops solids into smaller pieces. Flow rates up to 200 m³/h (880 gpm) at pressures up to 24 bar for fluid to viscous product with solids in the chemical and food industries.

Key technical parameters

Flow rate: up to 200 m³/h
Pressure: up to 24 bar
Design: hopper with integrated cutting system
NEMO range: viscosity 1 cSt to 10 million cSt, solids up to 150 mm, pH 0 to 14, temperature -20 to +300 °C (depending on elastomer)

Media handled

Liquids: Sludge, Sludge (dewatered), Slurry, Chemicals, Resin, Glue, Paint/lacquer
Media properties: Low viscosity, High viscosity, Contains solids, Abrasive, Corrosive

Applications and industries

Chemical and food industry
Products with solids that must be reduced in size

Wastewater treatment

Municipal wastewater

Food & beverage

Chemical

Mining and mineral processing

Pulp & paper

Biogas

No reviews yet for this pump series.