DRENOX

Technical Specifications

Flow rate ≤ 16.5 m³/h

Pressure ≤ 1.2 bar

Head ≤ 12 m

Motor power range ≤ 0.9 kW

Liquid temperature ≤ +40 °C

Viscosity ≤ 1 cSt

Particle size ≤ 6 mm

Drive type electric

Installation submersible,vertical

Materials (wetted) Completely stainless steel AISI 304

Seal type Mechanical seal

Price

On request

Jung Pumpen DRENOX series Drena-Line pumps made completely of stainless steel AISI 304 with a duplex mechanical seal, a moisture-sealed cable inlet and a motor cooled by a heat-exchange chamber so that it can run for long periods not completely submerged; low-level pumping down to 3 mm (model 80/7). Models 80/7, 160/8, 250/10 and 350/12 with up to 16.5 m³/h and 12 m head, free passage 3 to 6 mm.

Key technical parameters

Flow rate: up to 16.5 m³/h
Head: up to 12 m
Motor power P1: 0.3 to 0.9 kW
Free passage: 3 to 6 mm
Fluid temperature: up to 40 °C
Minimum drying level: 3 mm (80/7), 35 mm (others)
Drive: Electric motor (submersible)

Media handled

Liquids: Water (clean), Drainage, Groundwater
Media properties: Low viscosity

Applications and industries

Drainage of seepage water and rainwater
Fountains, water features and irrigation
Light industrial applications

Flood control

Construction

Irrigation

No reviews yet for this pump series.