ZPD

Beinlich ZPD external gear dosing pump: the most flexible line of Beinlich external gear pumps, available in cast iron and stainless steel with 43 displacement sizes, 5 shaft seal options and multiple bearing and wear plate choices; used for wide-range metering and transfer applications.

Key technical parameters

• Theoretical max. flow rate: 54.285 m³/h
• Displacement: 0.10 to 517 cc/rev
• Speed: 10 to 1,750 rpm (standard version)
• Viscosity: 0.8 to 1,000,000 mPas
• Temperature: -20 to +150 °C (special designs up to +350 °C)
• Operating pressure: up to 200 bar
• Drive: Electric motor

Media handled

• Liquids: Resin, Polyol, Isocyanate, Glue, Paint/lacquer, Oil (mineral), Fuel
• Media properties: High viscosity, Low viscosity

Applications and industries

• Dosing of polyurethanes, isocyanate, polyol, catalyst, additives, silicones, fuels, adhesives, oils, hotmelt and paints (media without fillers)
• Low pulsation and precise dosing
• Large flow range and many variations